TriggerShims Original Ruger 10/22 Custom Trigger Shim Kit

Our 10/22 Gun Shims and 10/22 TriggerShims Brand Kits are Custom Made here in Michigan Center, Michigan out of Alloy 302 Stainless Steel Manufactured in the U.S.A.
Our Shims are Available in .0015" and .002" through .010"

Tech Tip: 1022 #1

TECH TIP: Why 10/22 Shims?

Our Ruger 10/22 Trigger Shim Kits will remove side play found in stock and custom trigger assemblies, will stop the trigger from rubbing the trigger housing and smooth the trigger pull, correctly centering the Hammer, Disconnector, Sear and Trigger, Reducing Friction and possibly improving accuracy.
The Improvement in Metal Trigger Assembly's is Immediatly Obvious,
in Plastic Trigger Assembly's while not as immediatly noticable,
centering all parts is quite useful and worthwhile

All of our Stainless Shim Kits can be ordered for both the Original 10/22 Metal Trigger Housing and the New 10/22 Plastic Trigger Housing Assembly with one piece Hammer/Bushing set.
Easy to Follow Instructions are here -

TriggerShims Shim Kit Instructions are available on our
Shim Kit Installation Instructions Page

* Will NOT fit Rugers BX Trigger Assembly.

BOX1022/24PAK

OUR 24 PIECE 10/22 DELUXE SHIM KIT

STAINLESS STEEL DELUXE SHIM KIT

Our Deluxe Stainless Steel Ruger 10/22 Trigger Shim Kit includes 24 Stainless Steel Shims.

Shim #1 (largest) are 10/22 Hammer Bushing Shims, 2 each in .002" .003" and .005" thickness
Shim #2 (middle size) are 10/22 Trigger and Sear Shims, 4 each in .002" .003" and .005" thickness.
Shim #3 are 10/22 Disconnector Shims, 2 each in .002" .003" and .005" thickness.

Our Deluxe Stainless Shim Kit will stop all side rubbing in the trigger assembly,
and give you a nice selection of shims for a total
of .020" at at each shim location.
100% Satisfaction Guarantee!

"Cheater Pin" and Shis-Ka-Tool included to aid installation, U.S. Orders Only

Cheater Pin is 1/8" X 7/16"

Specify your Trigger Housing Style - New Plastic/Universal or Old Style Metal

Deluxe Stainless Shim Kit $25.00 Free Shipping and U.S. Tracking

BOX1022/8PAK

OUR 8 PIECE 10/22 STANDARD SHIM KIT

Our Stainless Steel Ruger 10/22 Trigger Shim Kit includes 8 Stainless Shims.

Shim #1 (largest) are 10/22 Hammer Bushing Shims, 2 each in .005" thickness.
Shim #2 (middle size) 10/22 Trigger and Sear Shims, 4 each in .005" thickness.
Shim #3 (smallest) are 10/22 Disconnector Shims, 2 each in .005" thickness.
Our Stainless Shim Kit will stop all side rubbing in the trigger assembly,
and comes with a 100% Satisfaction Guarantee!

"Cheater Pin" and Shis-Ka-Tool included to aid installation, U.S. Orders Only

Specify your Trigger Housing Style - Old Metal or New Universal

Our 10/22 Universal Kit also fits the T/C R22 Thompson Center 10/22 Clone

Included Cheater Pin is 1/8" X 7/16"

8 Pcs. Stainless Shim Kit $15.00 Free Shipping and U.S. Tracking

Tech Tip: 1022 #2

TECH TIP: Which 10/22 Shim Kit?

Hammer Shim Style -
Metal or Universal / Plastic ?

Our Ruger 10/22 Trigger Shim Kits come in two styles,
I describe as Metal or Universal / Plastic Style
The difference is the Hammer, and where you put the Two Different Style Hammer Shims

Metal or Plastic refers to the Trigger Housing Material, NOT the shim material
~ ALL OUR SHIMS are made from STAINLESS STEEL ~

Older Ruger Rifles (old school) had Metal Trigger Housings while Newer Ruger 10/22 Rifles have a Plastic Trigger Housing

The Old Style Metal Housing Trigger Assembly had a Hammer with 2 bushings, shims could be installed inside the bushings

Ruger's New Plastic Trigger Assembly used a Metal Injection Molded (M.I.M.) Hammer with molded-in bushings, and can only use the New Style Universal / Plastic Style Shims

NOTE: The New Universal Style Hammer Shim can be used with Both Style Hammers in both Plastic and Metal Trigger Housings

All of our Stainless 10/22 Shim Kits can be ordered either for the Original 10/22 Metal Trigger Housing or the New 10/22 Universal / Plastic Trigger Housing Assembly with one piece Hammer/Bushing set

NOTE: Old Style Shims can only be used with Bushings
NOTE: Universal / Plastic can be used with both
NOTE: 10/22 Shim Kit Not Compatible With Ruger BX Trigger Assembly

Note on VC10TH: The Volquartsen VC10TH comes supplied by the manufacturer
with two Hammer Shims for inside bushings
I recommend if additional shims are needed, use the Universal Style Hammer Shims
outside the bushings.

10/22 Bulk Paks

Bulk Paks of Hammer, Trigger/Sear or Disconnector Shims

Bulk Paks Order Below ~ Single Style Shim in any Multiple Thicknesses

Trigger / Sear Shim ~ .126" x .251"
Disconnector Shim ~ .095" x .174"
Plastic Style Hammer Shim ~ .157" x .310"
Metal Style Hammer Shim ~ .221" x .345"

Available in .002" - .010" Specify in box below

Free Economy Shipping ~ Mail

10/22 Cross Pin Shims

10/22 Cross Pin Shims
Tighten up a Loose Trigger Assembly

Our Cross Pin Shims will fit the Front Cross Pin that holds the Trigger Assembly in the Receiver.
By installing the Cross Pin Shim between the Receiver and Trigger Housing at the Front Cross Pin,
Side to Side play can be eliminated

*Also Fits Ruger Mini-14 Hammer

Our Standard Shim Pak Assortments are as follows;

2 Pak comes in .002"
4 Pak comes with 2 each .002" and .003"
6 Pak comes with 2 each .002", .003" and .004"
8 Pak comes with 2 each .002", .003", .004" and .005"
12 Pak comes with 4 each .002", .003", .004"
20 Pak comes with 4 each .002", .003". .004", .005" and .006"
24 Pak comes with 6 each .002", .003", .004" and .005"
30 Pak Gunsmith Special Assortment comes with 6 each .002", .003", .004", .005" and .006"
~OR~ Choose ANY Pak and Specify Your Requested Thickness in Comment Box

Price includes Free Economy Shipping ~ Mail

Cross Pin .189" X .368"

Item # SS-1022XPIN

Click Box to Choose Different Quantities

Each 10/22 Shim Kit includes Wooden Installation Shish-Ka-Tool and a 1/8" X 7/16" Cheater Pin in U.S. Orders Only
Sorry ~ We do not Export the Items Below

TECH TIP: Trigger Assembly Pins

The pins included in your Ruger Trigger Assembly serve the purpose, but leave something to be desired when upgrading your Trigger Assembly for best performance. Not exactly round and somewhat undersized, our Ground Stainless Steel pins are an easy-to-install improvement.
The Stock Ruger Pins in my Rifle were anywhere from .0002" to .002" undersize and out-of-round with a less than ideal finish.
These pins are approximately .0003" over nominal size and ground perfectly round.
By installing the Ground Stainless Oversize Pin Pak in my 10/22T which has a Power Custom Hammer and Adjustable Sear kit I measured over 1/2 pound additional improvement in Trigger Pull.
Your Satisfaction is Guaranteed 100%

Our Ruger 10/22 Oversize Polished Pin Paks

Our 10/22 Oversize Trigger Pin Pak

Slightly Oversize - Better Fit

416 Stainless Steel - Made in the USA
Meets Military Specifications

My Trigger Pin set includes 1 each - 5/32" Hammer Pin, 1/8" Trigger Pin, and 3/32" Disconnector Pin.
All 3 pins are Precision Ground Slightly Oversize* as opposed to the slightly undersize pins supplied by Ruger.
Will fit 99% of all stock Ruger Trigger Assemblies with a tighter fit.
These pins are sourced only from one of the very best suppliers in the U.S. and come with my 100% Satisfaction Guarantee on both Quality and Fit.

Note: Some Aftermarket Trigger Parts with very close tolerances may require you to polish pin down to fit.
*These pins are .0001" to .0003" (Tenthousandths) over nominal sizes listed above.

3 Piece Pak includes 1 Hammer Pin (B19), 1 Trigger Pin (B21) and 1 Disconnector Pin (KE02800)

* Ruger Stock Numbers for Reference Only

10/22 O.S. Pin Pak #3OSPP $9.95 Free Shipping

#B35PP Discontinued

#5OSPP Discontinued

#B5 Pin Pak Discontinued

BOX GGCG1022

Ruger 10/22 Complete Gun Guide

RUGER® 10/22® The Complete Gun-Guide® for All Models

UPDATED MARCH 2016!
FEATURES:
The only current printed manual that includes information on ALL models from 1964 ~ 2016.
Includes Carbine, Rifle, International, Takedown, SR-22 and Charger Models
67 pages & 106 high-resolution gray-scale images
COMPLETE Disassembly & Reassembly
Includes all serial numbers and manufacture dates for all models from 1964 ~ 2017!
Easy to use - Comb binding lies open and flat on your work surface
Cardstock cover. Bright white paper
UPC # 045635885639

The Complete Gun Guide ~ Ruger 10/22 Rifle

Item # GG-CG1022.....$12.75 + $2.75 S&H ~ Includes Tracking

Targets: 1022

10/22 Targets

Our Ruger 10/22 Trigger Shim Kits are used by Hunters and Competitive Shooters alike. The difference made with our shims is a small part of an overall trigger job, but the difference can be as much as 1/2# Reduction in Pull Weight simply with shims.
One Important Key to Good Shooting is a Good Trigger!

Customer Rickey in North Carolina writes;

Lance, took my 10/22 with rebuilt trigger to the range today and ran 5 different ammos through it, see attached photos. The trigger job using your TriggerShims shims and the Wolff springs did wonders for shrinking my group sizes, .231” average for 5 different ammos ain’t bad, all groups are 5 shots at 50 yards. Thanks again for a great product/service!!! Rickey

If you would like to display your target, send an email to Lance@TriggerShims.com

Michiagn Gun Groups

When governments fear the people, there is liberty. When the people fear the government, there is tyranny. The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government.

Custom made Stainless Steel Gun Shim Kits for the Ruger 10/22, 10/22 Magnum, SR-22, and Ruger Charger Pistol Trigger Assembly

UPGRADE FROM FREE ECONONY SHIPPING ~to~ SHIM TRACKING w/ SHIPPING PROTECTION #ESU

~ SHIMS ONLY ~
~ $5.00 U.S. Tracking UPGRADE ~

NOW Includes
~ SHIPPING PROTECTION* ~
~ USA ONLY ~

Upgrade from FREE ECONOMY MAIL to
Bubble Pak w/ Tracking

(Shims Only) Orders - Add TRACKING $5.00 - USA ONLY

Shim orders DO NOT include Tracking!

THIS IS FOR SHIMS - ALL OTHER ORDERS Include this Upgrade

~Click the ADD TO CART button below ANYTIME BEFORE WE SHIP SHIMS~

USA ONLY
* USPS Ground Advantage™ Service
* Replacement for items lost or damaged during shipping

~Click Here~ for U.S. PRIORITY Mail

👉Link To: ADD USPS TRACKING UPGRADE with SHIPPING PROTECTION

👉Link To: INTERNATIONAL TERMS / POSTAGE

We Cheerfully accept Cash, Money Order, and Credit Cards through our Secure PayPal Check-Out

All Website Orders are Shipped the Next Business Day

I will Ship Shims to USA, Canada and International

Gun Parts Shipped to USA Only

"American Made Gun Shims" - GunShims.com - TriggerShims.com
and
TriggerShims is a Trademark
of
Shively Sales
Michigan Center, Michigan

God Bless and Make America Great Again!

BY PURCHASING SHIVELY SALES PRODUCTS
YOU ASSUME ALL RESPONSIBILITY FOR THEIR SAFE INSTALLATION AND USAGE.
YOU RETAIN ANY AND ALL RESPONSIBILITY FOR YOUR OWN ACTIONS. Be Safe!!

If you have any questions or safety concerns, see a qualified Gunsmith.

I manage this site myself, Please Report Any Website Problems to;
Lance at Webmaster@TriggerShims.com

Republic.... I like the sound of the word. It means people can live free, talk free, go or come, buy or sell, be drunk or sober, however they choose. Some words give you a feeling. Republic is one of those words that makes me tight in the throat - the same tightness a man gets when his baby takes his first step or his first baby shaves and makes his first sound as a man. Some words can give you a feeling that makes your heart warm. Republic is one of those words. - John Wayne in the Alamo

TriggerShims.Com

TriggerShimsOriginal 10/22 Shim Kit

Rebellion Against Tyrants is Obedience to GodWhoever Would Overthrow the Liberty of a NationMust Begin by Subduing the Freeness of Speech ~ Benjamin Franklin ~

Manufacturer of Trigger Shims Brand American Made Gun Shims - Home of - TriggerShims.com GunShims.com ShivelySales.com MichiganCenterOutdoors SmallShims.com

WWG1WGA

This Page Index